Job Description: This is a highly skilled maintenance position, performing installation, preventive maintenance, and maintenance of machines used in a manufacturing facility. Works with minimal supervision, capable of setting own priorities and reprioritizing as needed.
Responsibilities:
Installation of new equipment.
Orders and stocks spare machine parts and supplies;
Maintains schedule for preventive maintenance using current CMMS system;
Responds to emergencies regarding machine failure as in a timely manner;
Hazardous Waste Attendant - See Hazardous Waste Contingency plan for detail.
Other Responsibilities:
Performs other maintenance duties as assigned;
Attends seminars and training courses regarding machine and equipment maintenance.
Supervises:None.
Knowledge, Skills & Abilities:
Candidate must be willing and able to work with hazardous waste generation, accumulation, and disposal activities;
Completion of Hazwoper certification;
Ability to establish and maintain a preventive maintenance schedule;
Ability and willingness to work with minimal supervision;
Ability and willingness to respond to emergencies as required which may require after hours, holidays, or week-end response;
Excellent communication skills, including verbal and written;
Ability to work with all level of employees throughout the organization;
Willingness and ability to flex shifts in a three shift operation;
Working knowledge of vacuum furnaces;
Working knowledge of the following systems: pneumatic, electrical, hydraulic, and mechanical systems;
Working knowledge of programmable controllers;
Demonstrated skill in the use of a computer;
Technical knowledge in electronics desired, but not required;
Must supply own hand tools
Education, Experience & Training:
High school diploma or equivalent.
Minimum of 2-3 years of experience in molding processes.
Physical Requirements & Working Environment:
Must be physically able to stand for long periods, bend, and climb ladders in conducting
maintenance on machines;
Physical stamina to lift 75-100 lb. on an occasional basis in performing maintenance duties;
Ability to work in the elements, including rain, snow, heat, and cold
Special Note: The intent of this job description is to provide a representative summary of job duties and responsibilities required of the position. Employees may be asked to perform other job-related duties or tasks that are not specifically identified in this job description. Acceptance of employment based on this job description in part or whole does not create an employment contract implied or otherwise.
ARC Group Worldwide is an Affirmative Action an Equal Opportunity Employer.
ARC Florida (DeLand, FL) Open Positions:
Location: DeLand, FL
Job Description: This position is responsible for developing, maintaining and continually assessing the effectiveness of the quality system as well as, responsible for directing and supervising a group of employees involved in inspection and quality control procedures with regard to in-process material and finished products to assure that quality control standards are achieved.
Responsibilities:
Ensures quality management system conformance to maintain industry standards including ISO 9001 and 13485.
Serves as management representative for external second and third party audits.
Oversees document control process of all quality related documents.
Manages system to record FA/PPAP warrants, deviations, corrective actions, preventive actions, supplier corrective actions, and engineering change notifications.
Provides oversight of the manufacture of products to ensure that engineering documentation is consistent with manufacturing methods employed.
Provides the highest level of internal and external customer service .
Translates customer critical / quality characteristics to process critical / quality characteristics.
Provides technical (quality tool) and statistical expertise to teams.
Transfers learning across teams.
Identifies application opportunities for the technical/statistical tools of quality/process improvement.
Serves as a liaison between customer representatives and production regarding quality issues.
Maintains a variety of production records and provides reports and data to production.
Provides direct supervision to the quality department.
Makes presentations regarding quality techniques, methods, processes, or results as requested.
Other Responsibilities:
May perform other quality related duties as assigned or requested by the GM.
Assists in data collection methodologies and quantification on financial impact of results.
Assists teams in presenting data and conclusions clearly.
Supervises:
Directly supervises employees in the Quality Dept. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
Knowledge, Skills & Abilities:
Proficiency in Microsoft Office software applications.
Working knowledge of QA testing equipment including:
Demonstrated knowledge of production processes and procedures
Working knowledge of quality tools - SPC, GR&R, blue print reading, GD&T, First Articles.
Must be versed in the latest QA testing techniques and methods and be able to apply to predetermined quality standards.
Ability to handle complex situations and simplifying for presentation to technicians.
Ability to read blueprints/drawings using Geometric Dimensioning and Tolerancing (GD&T)
Strong leadership skills.
Excellent analytical skills.
Passion and alignment with our mission, vision, values & operating principles.
Desire to own decisions and take responsibility for outcomes.
Willingness to travel when required.
Willingness to continually embrace personal and professional development.
Ability to read, write, speak and understand English.
Education, Experience & Training:
The preferred candidate will have a Bachelor degree from an accredited university in an Engineering or related discipline, as well as extensive experience in quality assurance management and quality engineering experience in a manufacturing environment. This position has managerial responsibility and communicates with outside vendors, reporting employees, and upper management. Experience working directly with customer representatives, engineering, manufacturing, and sales personnel on new product introductions, including specifications and quality appraisal systems is required.
This position is in a manufacturing environment and has contact with dirt, dust, oils and grease. To successfully complete the job, the applicant must be able to sit and/ or stand for extended periods of time, and also bend. Typing, fine grasping, seeing, hearing, and talking are required.
Special Note: The intent of this job description is to provide a representative summary of job duties and responsibilities required of the position. Employees may be asked to perform other job-related duties or tasks that are not specifically identified in this job description. Acceptance of employment based on this job description in part or whole does not create an employment contract implied or otherwise.
ARC Group Worldwide is an Affirmative Action an Equal Opportunity Employer.
Location: DeLand, FL
Job Description: This position is responsible for setting up and adjusting molding machines as necessary. Troubleshoots injection molding machine start-up, robotics, and vision systems.
Responsibilities:
Set-ups molding machines for initial run of any part including robotics and vision systems.
Provides technical recommendations, advice, and/or guidance to mold machine operators.
Ensures each machine is cleaned between jobs or changeover of materials and molds.
Inserts molds and conducts general machine set-up adhering to all pre-established safety procedures.
Ensures molding machines are producing parts as specified in the parameters.
Documents daily molding events in the technician log.
Prepares documentation for production runs.
Evaluates and approves First Piece from production runs.
Documents and reports mold and equipment related problems.
Conducts a minimum of two quality checks on parts per shift.
Maintains feedstock inventory to the planning department.
Maintains a clean, neat and orderly work area at all times.
Maintains clean grinders, hoppers and loaders during changeovers.
Interfaces with engineering, tool room, and quality assurance regarding parts, end of arm tools and feedstock respectively.
Supervises:None.
Knowledge, Skills & Abilities:
Working knowledge of various measuring tools and equipment including:
Micrometers
Pyrometers
Calipers
Ability to be flexible, working outside of normally scheduled hours to complete work as needed
Ability to multi-task
Strong mechanical skills
Knowledge and ability to work with mechanical hand tools
Ability to operate overhead cranes and forklifts as needed
Ability to read, write, speak and understand English
Education, Experience & Training:
High school diploma or equivalent.
Minimum of 2-3 years of experience in molding processes.
Physical Requirements & Working Environment:
Ability to push, pull, bend, crawl, reach, kneel or stand to perform daily work
Ability and willingness to work in a manufacturing environment which may include contact with dirt, dust, oils and grease.
Ability to lift up to 40 lbs unassisted.
Special Note: The intent of this job description is to provide a representative summary of job duties and responsibilities required of the position. Employees may be asked to perform other job-related duties or tasks that are not specifically identified in this job description. Acceptance of employment based on this job description in part or whole does not create an employment contract implied or otherwise.
ARC Group Worldwide is an Affirmative Action an Equal Opportunity Employer.
AFT-Hungary Kft. (Rétság) Open Positions:
We are looking for NPD Engineer to Rétság (Nógrád County) who has ability to manage the new products development (excluding product design) from beginning to serial production, understand customer specifications, technical applications and coming from relevant manufacturing industry. Industry focus is in the Automotive, Aerospace, Medical and Defense manufacturing segments but not limited to those areas.
As Our NPD Engineer
you are joining a global advanced manufacturer. Our company provides customers a compelling portfolio of advanced manufacturing technologies and cutting edge engineering capabilities that dramatically improve the efficiency of traditional manufacturing processes, reduce costs and accelerate time to market.
Responsibilities:
Develop and validate the products, meet with the project milestones and completion.
Analyze customer product specifications and applicable regulations /legislations for their area of the program.
Define the product functional analysis (based on standard) to translate customer specifications and internal requirements into clear product performance criteria.
Support the creation and maintenance of process documentation.
Define, plan, and follow the product validations, product improvements to meet the specifications.
Support reaching the quality, costs and delivery targets of the program.
Support and lead process improvement activities.
Achieve goals within budget.
Perform root cause analysis and resolve problems.
Lead and/or support technicians and trainee engineers.
Requirements:
Bachelor’s engineering degree and at least 2 years’ relevant experience in:
Manufacturing and New Product Development.
Automotive Industry Experience
Preferred, but not required for IATF 16469, Process Flow, FMEA, Control Plans.
Knowledge of professional programs: CAD (Solidworks preferred), Statistical software, MS-Office with MS - Project.
Ability to make presentations for both internal and external review.
Technical drawing reading and understanding knowledge.
Green or Black Belt DMAIC Training.
Highly energetic and exceptionally organized.
Personally and professionally motivated without need for regular, direct oversight.
Honest and have a positive "can-do" attitude with proven independent problem-solving capabilities.
A real team player, with a high level of dedication to "get the job done".
Ability to obtain information, build relationships inside the organization and outside with the customer technical team.
Experience in project management highly preferred and interacting with outside customers.
Perks and Benefits:
Being part of a growing and re-designed organization.
Let’s discuss, but evaluate realistically (we provide several options for benefits as well).
Travelling abroad for business purposes.
Opportunity to develop your professional skills with us.
Special Note: The intent of this job description is to provide a representative summary of job duties and responsibilities required of the position. Employees may be asked to perform other job-related duties or tasks that are not specifically identified in this job description. Acceptance of employment based on this job description in part or whole does not create an employment contract implied or otherwise.
ARC Group Worldwide is an Affirmative Action an Equal Opportunity Employer.